Download iPLEX Software Guide.book

Transcript
Defining Plates
Creating Samples
2.
In the PlateEditor, click the Sample tab.
Click the Samples tab
3.
Click the plus (+) symbol next to Sample: Sample Group: Sample.
Sample Group appears.
4.
Right-click Sample Group, and choose Add New Sample Group.
The dialog box to add a sample appears.
New Sample Group dialog box
5.
In the Group ID box, type a name for the sample group.
This name appears in the tree-list of the PlateEditor to identify the sample group.
Sample group names can have a maximum of 20 characters and must not contain any
single quote marks.
6.
For each sample in the sample group, type a name (in the SampleID column) and an
optional description (in the Description column). Use one row for each sample.
When you apply an entire sample group to a plate, the order of the samples
determines to which well each sample is applied. The samples are applied in the
order in which they appear in the sample group. For more information see “Sample
Order and Applying Sample Groups” on page 39.
Note: You can import sample names and descriptions from a Microsoft Excel file. See
“Applying Sample Group Mapping” on page 53 or “Importing and Exporting Plate
Table Information” on page 42.
MassARRAY® Typer 3.4 Software
User’s Guide for iPLEX™ and hME
38
Doc 11546, R03 CO 060094
June 30, 2006