Download Manual - ADLINK Technology
Transcript
2.1 Jumpers on the cPCI-3500A The jumpers on the cPCI-3500A allow you to configure your CPU module according to the needs of your applications. If you have doubts about the best jumper configuration for your needs, contact your dealer or sales representative. The cPCI-3500A module is constructed from the main board (which has CPU Socket on it) and the daughter board (which brings out serial port and parallel port). There are jumpers on both main board and daughter boards. The following table lists the jumper connectors on cPCI-3500A and their respective functions. Board Connector Description Main board JP1 CPU Speed Select Daughter board JP1, JP2, JP3 Select COM2 Type Note : There is no jumper for DiskOnChip BIOS expansion address selection. User can select DOC BIOS expansion address from CMOS setup. The default expansion address for DOC is located from D8000h to DFFFFh. Hardware Installation • 9