Download DISCO manual

Transcript
8. DELIVERY CONDITIONS, HARDWARE REQUIREMENTS
DISCO has been developed by the author with no contribution of any third parties of persons. The author does not intend to register this software or to take any other steps to protect his rights and/or distribute his product commercially. As this software has been enclosed to the doctor’s thesis submitted at
the Civil and Environmental Engineering Department of the Gdansk University of Technology (further
called ”the University”), the University owns now its copy rights. As such, the University may take
steps to protect these right, and/or impose any distribution or other restrictions according to its policy.
Although utmost care was taken to debug this software, nor the author neither the University can be
held responsible for any consequences of its applications. In particular, users are warned that unprofessional modifications of the included Pascal and text files (e.g. intended to adapt third party lay-outs)
may cause the damage of the software.
The software is delivered in a set containing:
• this manual;
• one 3½” diskette named ‘DISCO’ and containing:
• system files in directories DISCO and DANCE;
• data files in directories CBE, DBE, CPT, DPT, CGR, DGR, CPF, DPF, CST, DST, CSF,
DSF.
As the first software versions were developed in the late 1980’s, the hardware requirements are quite
mild in relation to the current standards. What the user needs, is only:
• PC running under any version of MS Windows or MS DOS;
• hard disk in drive C:\ with about 1 MB memory space for the DISCO system files;
• graphical card “on board” enabling the emulation of one of the following cards: CGA, MCGA,
EGA,VGA or Hercules;
• diskette drive, USB port or any other data storage device – as long as it is configured to be A:\.
The delivered software version can not address a data storage port other than A:\. It is also not tailored
for running in a network system, although it can be adapted to that by a skilled professional.
9. PROGRAM INSTALLATION
To install the DISCO software on your PC, please do the following:
1. Make a back-up copy of your original DISCO diskette.
2. Take a new diskette, a USB memory key or any other data storage medium assigned to drive A:\,
15)
and copy all data file directories (CBE through DSF) into it. Label it, e.g., “DISCO data” .
For operation under MS Windows:
3. Insert your DISCO diskette into a disk drive of your PC. Get its directory on the screen.
4. Use MS Windows Explorer to copy the entire directories (names and contents) DISCO and
DANCE into drive C:\ (Attention: Not into C:\Programs or any other directory on drive C:\).
5. Click on C:\DISCO and get its directory on the screen.
6. Link (shortcut) the DISCO.EXE file to your MS Windows desktop
(Attention: Not the DISCO files with other extensions, e.g. PAS, BAK).
7. Link (shortcut) the DANCE.BAT file (MS DOS batch file) to your MS Windows desktop
(Attention: Not the DANCE files with other extensions, e.g. EXE, PAS, BAK, TXT).
8. Get your desktop screen, insert the DISCO data disk in drive A:\, click on DISCO and … Voila!
15)
Further in this manual, we shall talk about “data disk” and “drive A:\” only. However, it refers also to, e.g.,
“USB data key ” and “port A:\” if this is the configuration of your computer.
23