Download PS22 User Manual
Transcript
Chapter 5 - Setup library and applications For explanations of each of the Factory Presets (permanently in the Load menu), please see Appendix A. Information on how to use the Load and Save menus —including putting your own presets into the menu— is in Appendix B. Because the strongest effects of the pseudostereo processes use two plug-ins, the Setup Library is a little more complex than with other Waves processors. Each name of a setup has the format: description.otherplug-in which means that the other plug-in to use with the one you’re using will be in the name. For example, if you load the PS-Spread(10) setup file, you’ll see “Diffuse 1.X” in the Load popup, which shows that you should use the DLA-X after the Spread plug-in. (If it said “Rock 2.XL”, then you would load the DLA-XL after it. And so it goes.) Next, in the DLA-X, you would load the DLA-X setup file, and you’ll see “Diffuse 1.Spread(10)” in the Load popup, which you would select. You can see that the name of the setup is telling you to use the Spread(10). In other words, select the same setup in both plug-ins, when indicated. Of course, some setups don’t require the DLA-X plug-ins, and they will have a simple name. This doesn’t mean you can’t use the delay crossfeeds. If it sounds good to your ears, just make sure you’re not breaking any local laws or regulations of stereo-image width boundaries. Stay out of trouble. Types of setups in the library Three categories of setups have been developed for the PS22, and there may be more as time passes. These divisions are not into separate files, but are distinguished by the name of the setup since there are not so many setups in this library. Instead, it’s better to provide good starting points for you to adjust to fit the source. From time to time, you might want to check the Waves web page to see if any updates or tips have been posted, at www.waves.com. Positioning/low diffusion Taking a mono input and repositioning parts of the mix into different areas of the stereo output image can be used for historical recordings —such as 78rpm or classic pop music from several decades ago, in remixing of records that had a low number of tracks —such as the 3-track masters from the same time, or for split-band processing where the phasiness of a crossover is undesirable. Setup names that specifically reposition certain frequency bands are clearly named. For example: BassLeft OtherRight would clearly put most of the bass on the left. BassRight OtherLeft opposite of above. Combinations of positioning and low diffusion may indicate application or technique. PS22 Plug-In Manual PS22 Version 3 23 7/5/00, 10:54 AM 23