Download - 12d Model

Transcript
12d Solutions Pty Ltd
COURSE NOTES
STORMWATER DESIGN
In general the Analyse network is always selected. If you only want to plot or create the reports
then remove the tick.
Storm Factors
Select the folder icon on the Rainfall location file and then walk right on the Lib line to select
one of the rainfall files in the 12d library. If the file has only one type of rainfall definition then
the Rainfall method field will be completed. Otherwise select the Rainfall method desired. The
valid Return period will depend of the method selected but you cannot extrapolate beyond your
data.
Event type determines which set of design values (minor or major) will be used for this run.
Enable the 12d rational method engine partial area calculations by selecting the Partial area
effects box.
Network Design Factors
Selecting Pipe Sizes
These values control the values to be designed in the run. If Design pipe sizes is selected then a
files containing the available pipe sizes must be supplied. The pipe sizes in this file are in the
Revised February 2006
12d Stormwater Design Course Notes Page 67 of 94