Download sailmail website
Transcript
Connecting to Sailmail via Internet Click OK, then select "WHV382" (or click "New"), and check (or enter) the following: Remote callsign: WHV382 Remote host: r7fh.no-ip.com Port: 50 (or 50001) TImeout: (leave blank) Local callsign: (your Sailmail/marine callsign) Password: (your Sailmail internet "POP3" password, Case-Sensitive!). Check the box "Include in check-all" (unless this was checked for WRD719, above). Click OK to save settings. (Note: Don't change the "B2" selection) To check mail, go to Airmail's Modules/Telnet menu, make sure that WRD719 or WHV382 is selected in the callsign box and click the green "connect" button (or the "Check All" button). ** Note: For quicker access via Iridium, use WRD719, make sure the port is "50", and enter the numeric IP-address "72.32.198.206" instead of "pop3.sailmail.com"-- this saves a few seconds. Note that this address may change if we need to shift servers-- so if it won't connect then enter the "pop3.sailmail.com" and note the address which is shown when you connect. (Don't include the quotes shown here). Troubleshooting =============== If you get an error instead of connecting, then double-check your settings and try port 50 instead of 50001, or vice-versa. Also try opening a web page in a browser. If you cannot open a web page, then find out why your internet connection is not working. If you can open a web page but cannot connect to Sailmail, then it is likely that the internet provider has blocked port 50 and 50001. Ask them to un-block port 50 (or 50001), or read on: There is one other trick, and that is to use Airmail's "mail client" window to access Sailmail's POP3 server. This is unlikely to be blocked for receiving mail, but may be blocked for sending mail. Here's the skinny: Connecting to Sailmail via Airmail's mail-client window: ========================================================= Open Airmail's Tools/Options window, click on Modules tab, make sure that "Mail (pop/smtp) Client" is checked (enabled). Click OK to save changes and close. Now go to Airmail's Modules menu, Mail-client. If you don't already have a "Sailmail" tab, then click "New", enter "Sailmail" as the account-name (without the quotes, for all this), and enter the following settings: On the right side, under "POP3 connection", enter the following: ---------------------------------------------------------------Server address: pop3.sailmail.com Login name: (your Sailmail callsign) Password: (your Sailmail password, same as for telnet) Leave mail on server: No check-mark (no entry for "days" or "KB" box) Timeout: 60 Port: 110 Tick the box "Include in check-all". On the left, under "SMTP connection" enter the following: --------------------------------------------------------Server address: smtp.sailmail.com http://sailmail.com/saildocs/internet.htm[16-Nov-15 11:01:41]