Download TS100 User manual
Transcript
After above step, you have installed the driver in your PC successfully. Now connect the TS100 device to PC, normally the system will not prompt for install a driver any more. It will recognize by the PC automatically. If you are still prompted by the system, you can follow the PC prompt and direct the driver location as you have selected in above process. Normally, if you didn’t make change the directory, it’s locates in: C:\SiLabs\MCU\CP210x Setup will continue installing drivers and will display a window about successful process in the end. Click 'Finish' to complete installation. Copyright © 2015 Shenzhen ANB Technology Co., Ltd. All rights reserved.