Download L-INX User Manual

Transcript
L-INX/L-GATE User Manual
26
LOYTEC
You should now be able to connect to the device with a Web browser, access it through an
OPC XML-DA client or add it to a CEA-852 configuration server as an IP-852 channel
member. Also the L-INX Configurator is now able to connect to this device.
2.2.2 IP Configuration via the Web Interface
Optionally to using the console interface one can also use the Web interface to configure the
client device. In a Web browser enter the default IP address ‘192.168.1.254’ of the device.
Note that if your PC has an IP address in a subnet other than 192.168.1.xxx, please open a
command tool and enter the following route command to add a route to the device.
To Add a Route to the Device
1.
Windows START  Run
2.
Enter ‘cmd’ and click OK.
3.
In the command window enter the command line
route add 192.168.1.254 %COMPUTERNAME%
In Windows7 replace %COMPUTERNAME% with the PC's actual IP address.
4.
Then open your Web browser and type in the default IP address 192.168.1.254.
Figure 4: Example Start Screen.
5.
Version 4.4
Click on Config in the left menu. You will be asked to enter the administrator password
in order to change the IP settings. Enter ‘loytec4u’ and select Login.
LOYTEC electronics GmbH