Download ControlLogix Controller and Memory Board Installation Instructions

Transcript
ControlLogix Controller and Memory Board 35
To connect a workstation to the serial port, use one of these cables:
• 1756-CP3 serial cable
• 1747-CP3 cable from the SLC product family. If you use this cable,
the controller door may not close.
1
2
Item
Description
1
Workstation end
2
Controller end
42576
If you make your own serial cable, limit the length to 15.2 m (50 ft), wire the
connectors as follows, and attach the shield to both connectors.
2
1
1 CD
1 CD
2 RDX
2 RDX
3 TXD
3 TXD
4 DTR
4 DTR
COMMON
COMMON
6 DSR
6 DSR
7 RTS
7 RTS
8 CTS
8 CTS
9
9
Item
Description
1
Workstation
2
Controller
42231
Publication 1756-IN101L-EN-P - June 2008