Download Viewed - ARM Connected Community
Transcript
Cyclone for ARM® devices 11 AUTOMATIC SERIAL NUMBER MECHANISM When producing a microcontroller- or microprocessor-based product, it is often useful to program a unique serial number into the permanent memory (FLASH) of the product. P&E has developed a serial number mechanism to automate this process. Each time you issue a serialization command in the programming software, the current serial number is programmed at a specified address. In addition, the serial number is incremented to the next available serial number and saved for future serialized programming operations. The Cyclone for ARM devices adopts this automatic serial number mechanism for its stand-alone operations. 11.1 Understanding Serialization The automatic serial number mechanism supports serial numbers from 1 to 16 bytes in length. Each byte of a serial number ranges between a lower and an upper bound. This approach allows the individual bytes of the serial number to have distinct properties. Some of the forms these properties can take are: Type Lower Bound (hex) Upper Bound (hex) Constant Constant Constant Binary 00 FF ASCII Printable 20 7E ASCII Numeric 30 39 ASCII Upper Case Letter 41 5A ASCII Lower Case Letter 61 7A Other XX YY Each serial number and its properties are stored in a separate file. Any file name can be used for the serial number file, however the extension .ser is normally appended because it makes it simpler locate the file. A utility called SERIALIZE has been developed to make it easy to create, visualize, edit, and maintain these serial number files. 66 Cyclone for ARM devices User Manual