Download PCI334A Cabling

Transcript
Chapter 2: Introduction
Figure 2-1: PCI334A Side View Photograph
Programming Differences
Some modifications are necessary to the QUICC register values for proper operation of the
PCI334A with the SRAM instead of the DRAM SIMM on the PCI334. These disable the DRAM
controller and enable the SRAM controller. The registers are:
•
Global Memory Register
•
Base Register 1
•
Option Register 1
•
Base Register 2
•
Option Register 2
Further description of the changes can be found in Appendix B, “Register Value Changes for
SRAM,” on page 77.
In addition, the PCI Device ID has been changed to 0x334a. This is in one of the PCI9056
Configuration Registers. A new register field has been added, the Software ID. It is in the
PROM Write Enable Register (one of the local registers). Its value is 6 (decimal).
18