Download preliminary design review section 6 software control system
Transcript
VST Project Osservatorio Astronomico di Capodimonte Napoli POINTING tracking list setup file commands commands MODE SWITCHING commands TRACKING WS part OPTICS CONTROL commands tracking states ACTIVE OPTICS commands USER TCS global states test offset correction commands AUTOGUIDING TRACKING LCU part tracking data LCU states AXIS CONTROL MODULE Fig. 5.4 - VST Tracking WS-LCU design diagram During tracking operations there is a continuous data/commands flow between WS and LCUs. The run-time state of the tracking module is stored and reflected in the on-line database. A preliminary discussion about tracking states is the following: OFF: in this state all LCU and tracking processes states are undefined. This operational mode can be the result of following sub-states: STEADY: in this case the tracking module is in OFF state after a normal bootstrap or shutdown. ERROR: in this case the OFF state was resulting after an abnormal situation during tracking process. STAND-BY: during this mode all LCUs involved in the tracking functions are ready with software loaded. Also in this state there are two sub-states, STEADY and ERROR, that indicate, respectively, normal or abnormal transitions to STAND-BY state. Via Moiariello 16, 80131 Napoli Italy Tel. 081 5575111 Fax 081 456710 31