Download Link to Program Manual in PDF Format
Transcript
InterFlex Systems Understanding the TNC Understanding the TNC Understanding the basic operation of the Terminal Node Controller or TNC will help you get the most out of your TNC, your radio, and this software. You operate your station as a “terminal” or “end” node or station, originating or receiving messages. Even in a QSO, you are typically at the sending or receiving end, which is one reason for calling the radio controller a TNC. Some people want to give other names to multimode controllers, but basically, the name TNC is used because it describes what the unit does. Some think of the TNC as a MODEM, like a telephone modem that is used with some phone modem communications program. True, a TNC can be operated with a telephone modem type program but this greatly reduces the capabilities of the system. We are often surprised to hear “experts” suggesting to new users of digital modes that “all you need is your favorite telephone modem terminal program to run a TNC.” This is unfortunate because modem programs are just not capable of operating the tnc in anything but its most basic mode, the “command” mode. Even some programs designed for digital modes still run in command mode, or are revisions of programs originally written for that mode, which again reduces their capabilities as multi-mode, multi-task, multi-connect programs. What is a TNC? A TNC has two sections: a computer section that does the digital encoding, decoding, data handling, and an analog part that deals with the tones sent and received. The digital or computer section includes a computer chip, some RAM memory, and the computer software in Read Only Memory format (ROM). The digital/computer section handles several functions including communication to and from the computer (on the serial port), the assembly of data into various formats to operate different digital modes (on multi mode controllers), lots of timing functions, and sending and receiving data to the analog section. In all modes, the digital section assembles and disassembles bits of data sent and received over the air. It maintains the links in ARQ modes, keeps track of frames in packet mode, and controls the built-in mailbox functions, as well as other functions. 91