Download Purpose of Document

Transcript
Milan / Paylink User Manual
Issue 1.7 11th September 07
Multiple Paylink Unit Support.
Overview
Although the Paylink system was designed on the basis of a single Paylink unit being connected to a
PC, facilities are provided to support multiple Paylink units.
The only change that is visible to a programmer when multiple units are in use is that the
OpenSpecificMHE is used to associate a specific one of the multiple Paylink unit interface areas
with the program.
It is envisaged that in a system with multiple Paylink units a separate instance of the program will be
running for each Paylink unit interface area and a supervisory level will start the different programs.
This is not compulsory as OpenSpecificMHE can be called repeatedly with different parameters so
as to switch between Paylink unit interface areas.
Unit Identification
The USB interface chip on a Paylink unit provides a “Serial Number”. This is pre-set during
manufacture to "AE000001" - but is not used or checked in a system that does not have multiple
units.
When the AESWDriver program is run, the default is for it to search all USB devices that may be a
Paylink, and connect to the first one it finds. When the /S=<SerialNo> switch is provided on the
command line, this has two effects:
Firstly, it causes the driver program to create a named Paylink unit interface area, which can then be
connected to by an OpenSpecificMHE call with a matching parameter.
Secondly it causes the driver program to search all USB devices that may be a Paylink until it finds
one with a matching programmed serial number.
The serial number is not associated with the Paylink firmware, and any release of Paylink firmware
may be used in a multiple Paylink system. The PaylinkSerial utility is available as a part of the
released SDK, which takes as a parameter a serial number and programs it into the single Paylink
unit currently connected to the system.
CONFIDENTIAL
Not to be disclosed without prior written permission from Aardvark Embedded Solutions Ltd
Page 33 of 63