Download BTM510/511 Multimedia Module User Guide

Transcript
BTM510/511 User Guide
®
Bluetooth Multimedia Module
Response: <cr,lf>OK<cr,lf>
Or: <cr,lf>ERROR 68<cr,lf> If no SLC present
Or: <cr,lf>ERROR 69<cr,lf> If in-band ring flag was not set in the HFG supported features (S596) at boot
time
2.6.8.2.13 Subscriber number records (+CNUM…, #20_4.30)
AT+HFGS=<number_string>,<type>,<service>
This command adds a subscriber number record to the HFG. The subscriber number is the telephone
number of the HFG. It may have more than one subscriber numbers. All subscriber numbers available
should be stored in the HFG immediately after power up of the system. When an SLC to a HF device is
established, the HF can query the HFG’s subscriber numbers at any time by sending AT+CNUM to the
HFG on the SLC. The available subscriber number records then transfer to the HF automatically.
Subscriber number records are stored in volatile memory and are lost on reset or power cycle. At
maximum, 4 subscriber number records are allowed.
<number_string> = subscriber number string, characters allowed: 0123456789*#+ABDCTP!W@
<type> = specifies the format of <number_string> provided, can be one of the following values:



128-143: The phone number format may be a national or international format, and may contain
prefix and/or escape digits. No changes on the number presentation are required.
144-159: The phone number format is an international number, including the country code prefix.
If the plus sign (+) is not included, it shall be added by the AG as needed.
160-175: National number. No prefix nor escape digits included.
<service> = service of this subscriber number, permitted values:
4 – voice
5 – fax
Embedded Wireless Solutions Support
Center: http://ews-support.lairdtech.com
www.lairdtech.com/bluetooth
Laird
136
Americas: +1-800-492-2320
Europe: +44-1628-858-940
Hong Kong: +852 2923 0610