Download Network Video Recorders

Transcript
CAUTION!
Unsaved settings will be lost if the NVR is shut down unexpectedly, for example, due to a power
failure. An incorrect shutdown during a system upgrade may cause startup failures.
Part II Web-Based Operations
1
Before You Begin
You may access and manage your NVR remotely through the Web interface. Check the following
before you begin:

Access will be authenticated during login, and operation permissions will be required.

The client PC is operating properly and has a network connection to the NVR.

The client PC uses the Windows XP, Windows 7 or Windows 8 operating system.

A Web browser has been installed on the client PC. Microsoft Internet Explorer 8.0 or higher is
recommended. Chrome and Opera browsers are also supported.

A 32-bit Web browser is still required even if you are using a 64-bit operating system.
NOTE!


2
The parameters that are grayed out on the Web GUI cannot be modified. The parameters and
values displayed may vary with the NVR model.
The figures are for illustration purpose only and may vary with the NVR model.
Login
1.
Open a Web browser on your computer and browse to the login page by entering the IP address
(192.168.0.30 by default) of your NVR.
You may need to install a plug-in as prompted at your first login. Close the Web browser when
the installation starts.
2. In the login dialog box, enter the correct username and password (123456 for admin) and then
click Login.
CAUTION!
The default password 123456 is intended only for your first login and should be changed
immediately after login to ensure account security.
87