Download digital signage

Transcript
DIGITAL SIGNAGE
Remote control





1 To turn the power on or off.
2 Move up in OSD menu.
3 To move left or control the volume down in OSD
menu.





4 To move right or control the volume up in OSD menu.
5 To move down in OSD menu.
6 [ENTER] Select in OSD menu.
7 Display the OSD menu.
8 Close the OSD menu.
9 Display the menu of signal source and choose it.
0 Temporary sound switch off.
[TIP] If it doesn’t need to control display by a remote-controller, press button of remote-controller in order following.
MENU → SOURCE → EXIT → ▼ → ENTER(↵)
* Press button once again in order above so that original condition is returned.
10