Download 2.3 External connections

Transcript
2.3.1.4 Power supply connector
In the RB-MTX modem power supply 6V..30V care must be taken to ensure “clean”
power supply input and especially to avoid short transients on power supply lines originating
from inductive load switching. Otherwise internal module (G24, H24 or HE910) may be
permanently damaged.
2.3.1.5 Audio I/O
Audio Input and Output lines are available as option. There are three lines available:
 SPK/LINE OUT – external speaker or line out
 LINE IN
 MIC IN –microphone plug
2.3.1.6 20-pin connector
RB-MTX is available with 20pin connector as an option. Detailed description is shown
below.
PIN*
Upper row
1
3
5
7
9
11
13
15
17
19
Function
ADC IN1
DAC OUT
GND (not main supply input)
IN1
IN3
OUT1
OUT3
I2C SDA
CAN L
GND (not main supply input)
PIN*
Lower row
2
4
6
8
10
12
14
16
18
20
Function
ADC IN2
NC
NC
IN2
IN4
OUT2
OUT4
I2C SCL
CAN H
+3.3V output, 75mA max.
GND – ground. Do not connect directly with minus of power supply input.
NC – not connected
9