Download 4.6-E1
Transcript
ARIB TR-B15 Version 4.6-E1 7.2.8.2 Using PMT For PMT updates, in principle, ES information shall be added or deleted at the time of start/end of subtitles and superimposed text; however, it shall be also made possible to use PMT with ES information always being published. 7.2.8.3 Stream format identification stream_type for subtitles and superimposed text shall be 0x06 (independent PES_packet). 7.2.8.4 Using descriptors Table 7-8 shows the usage of PMT and EIT descriptors for subtitles and superimposed text. Table 7-8 Descriptor Stream identification descriptor Data encoding method descriptor Target area descriptor PMT and EIT descriptor usage PMT Mandatory Mandatory Mandatory when specifying a target area Data contents descriptor − EIT − − − pf-EIT: Mandatory sch-EIT: Optional (shall not be written for superimposed text.) 7.2.8.5 Data encoding method descriptor The data encoding method descriptor data_component_id shall be 0x0008 for both subtitles and superimposed text. Table 7-9 shows parameters to be set for additional information identification. Table 7-9 Field DMF Timing Setting parameters for additional information identification in the data encoding method descriptor Usage '0011' Subtitles : '01' (program synchronization) Superimposed text : '00' (no synchronization) or '10' (time synchronization) 7.2.8.6 Target area descriptor Shall be compliant with Chapter 5 Data Transmission Specification Usage, or PMT region descriptor. 7.2.8.7 Data contents descriptor Table 7-10 and 7-11 show parameters that can be set for the data contents descriptor and its selector area. Note that if there is inconsistency between these setting parameters and the data encoding method descriptor and caption management data in PMT, the data encoding method descriptor and caption management data shall take precedence. -3-80-