Download PROKLIMA

Transcript
5.2 Pressurised tanks
The pressure tanks and pressurised plants are subject to ATEX, as well as to the
European pressure equipment directive PED 97/23/CE, which indicates methods for
constructions and installation of pressure equipment. This document does not
examine the PED Directive. However, it is important to know that pressure tanks
and plants must be ATEX and PED (CE) certified.
The fixed tanks with capacity between 5 m³ and 50 m³ are positioned either underground or above the ground. Generally, in XPS production plants, tanks of 30 m³
are used to optimise transportation of the blowing agent.
5.3 Construction method for storage areas
Usually the tanks are carbon steel horizontal tanks with capacity of 30 m³. The size
of the tank is chosen to optimize transport and loading of the blowing agent. Plants
using a mix of CO2 and flammable liquid can use smaller tanks of approximately
10 m³. Figure 20 illustrates a layout of the tank construction.
Figure 20: Layout of storage tank construction
COLLECTION PIT
WATER DRAINAGE HOLE
70