Download User`s Manual

Transcript
1
1.3.3
Introduction
External Control
With the built-in the External Control ports (No. 3, Figure 1-2), you can connect the PA 200 to
external control devices, such as control buttons, if necessary. It is required to use the wire
AWG 28~20 for connection. The pin functions are as the followings:
Pin Number
Function
1+2
Power
3+4
Play
5+6
Stop
7+8
Pause
The figure below illustrates how to use the External Control ports to connect to the external
control devices:
Figure 1-3
5