Download warning - Fujitsu
Transcript
USING SETUP MODE Table 5.3 MENU1 and MENU2 Items and Options NOTES: • Underlined options are the factory defaults. • Asterisks identify items and options that differ for the IBM XL24E and Epson ESC/P2 emulations. The notes are defined at the end of the table. MENU1 and MENU2 Items Options <EMULATE> Description Select the same emulation as is selected in your software. See the section Selecting an Emulation in Chapter 2 for information on selecting an emulation. DPL24C+ Fujitsu DL-series printers (DPL24C PLUS command set) XL24E ESC/P2 IBM Proprinter XL24E printers Epson printers using the ESC/P2 command set NOTE: When you change the emulation, all MENU1 or MENU2 options are reset to the factory defaults for that emulation. For each of the following fonts, the recommended pitch settings are given after the font name. When you change the font, be sure to also change the pitch, if required. <FONT> COUR 10 PRSTG12 COMPRSD BOLDFCE PICA 10 CORRESP OCR-B OCR-A COUR-N COUR-B COUR-I N.SAN-N N.SAN-B N.SAN-I 5-14 User's Manual