Download Ch-02 NL8 System Setup
Transcript
2.06 Production Order Format Natural Log allows you to set up Document formats for each NL station as well as a Multi-Station format for situations in which more than one station appears on a Document (such as a multi-station order). If you are running only one station you do not need the Multi-Station Documents. If you are running more than 1 station you must set up a Document format for each station plus the Multi-Station Document format. Single Station Natural Log's individual Station Documents are accessed from the main NL menu, click [Setup] [Administrator Controls] [Station Settings / Document Formats]. Multi-Station Natural Log's Multi-Station Documents are accessed from the main NL menu, click [Setup] [Administrator Controls] [Multi-Station Document Formats]. Production Order Header This is the large typeface page heading to be printed on the Production Order for the selected station. Bottom Message for Production Order This is the small typeface message printed at the end of the Production Confirmation. This can be anything you want such as production instructions. The following buttons are available: q [Restore Default Settings] You can return to the 'default' Document format anytime by clicking this button. q [Page Margin / Font] If you desire you can change the page margins left/right and top/bottom used when printing this Document. You can also select a different font and/or font size. Warning: Font sizes above 12 are not recommended because larger fonts allow too little information to be printed in a column. q [Print Sample] Sends a sample Production Order to the printer. Page 2-12 Natural Log User Manual