Download MICROVIP3 Plus

Transcript
Fourth page (single-phase)
kVArh : Reactive energy export for the single phase system (COG4 option)
kWh : Active energy export (COG4 option)
MICROVIP3 Plus
3-PHASE ENERGY & HARMONIC ANALYZER
PAGE
kVArh
PRINT
SEL
PRG
SELC
SETC
PAPER
SET
ELCONTROL energy
Fifth page (single-phase)
kVAr : Average Reactive power peak of the single phase system
kVA : Average Apparent power peak of the single phase system
kW : Average Active power peak of the single phase system (Maximum demand)
Peak values are memorized and displayed only after an integration period of 1, 2, 5, 10, 15, 20, 30 or 60 minutes from
the time the instrument is first switched on. Values are updated every fifth of the integration period.
MICROVIP3 Plus
3-PHASE ENERGY & HARMONIC ANALYZER
PAGE
kVA
kVAr
PRINT
SEL
W
PRG
PEAK MEM
SELC
SETC
PAPER
SET
ELCONTROL energy
Sixth page (single-phase)
THDF V - THDF A : Total Harmonic Distortion Factor of Voltage and Current referenced
to the rms or to the fundamental value for the 50/60 Hz systems
MICROVIP3 Plus
V
3-PHASE ENERGY & HARMONIC ANALYZER
A
PAGE
PRINT
SEL
PRG
SELC
SETC
PAPER
SET
ELCONTROL energy
Seventh page (single-phase)
Data storage control page
Log on (off) : to activate (or de-activate) data storage (using the SET key)
01-99 m (minutes) : Data records rate
(00 = 3 seconds)
00-100 (%) MEM : % of memory used
MICROVIP3 Plus
3-PHASE ENERGY & HARMONIC ANALYZER
m
PAGE
PRINT
SEL
PRG
MEM
SELC
SETC
SET
ELCONTROL energy
16
PAPER