Download Manual - MyFlukeStore.com
Transcript
Thermal Imagers Using the Menu Setting the Date To set the date: 1. Press until the F3 softkey label reads Settings. 2. Press the softkey labeled Settings. 3. Within the Settings Menu, press , labeled Menu, until the F1 softkey reads Date. 4. Press the softkey labeled Date. The date can be displayed in one of two formats: MM/DD/YY or DD/MM/YY. 5. Press the softkey labeled with the preferred date format. 6. Press the softkey labeled Up () or Down () to adjust the selected date element. 7. Press the softkey labeled Next to move to the next date element. 8. Press the softkey labeled Done when finished. 9. Continue adjusting other items in the Settings Menu, or quickly squeeze and release the trigger twice in order to return to live view. Setting the Time To set the time: 1. Press until the F3 softkey label reads Settings. 2. Press the softkey labeled Settings. 3. Within the Settings Menu, press , labeled Menu, until the F3 softkey reads Time. 4. Press the softkey labeled Time. The Imager will display time in two different formats: 24 hour or 12 hour. 5. Press the softkey labeled with the preferred format. 6. Press the softkey labeled Up () or Down () to adjust the selected time element. Shop for Fluke products online at: www. MyFlukeStore.com 1.877.766.5412 9