Download NOtE - Accusys

Transcript
Using the RAID GUI
Stripe Size (KB)
4 / 8 / 16 / 32 / 64 / 128 / 256 / 512
The stripe size must be larger than or equal to the
cache unit size.
Alignment
Offset (sector)
Set the alignment offset for volume starting sector
to enhance the controller’s performance. For
Windows OS, it is suggested to set the alignment
offset at sector 63.
Note
1.
2.
3.
4.
5.
6.
All logical disks must be in the same RAID level.
No two logical disks can be in the same disk group.
None of the logical disks can be used by other volumes.
None of the logical disks can be bound to any LUNs.
All logical disks must be in the optimal state.
All disk groups of the logical disks must belong to the same owner
controller.
• Delete volumes
Select the volume(s) you want to delete and click Delete. To delete all
LUNs of volx, check the ‘Force to delete LUN mapping(s)’ box. All access
to the volume will be stopped.
• Modify volumes
To modify a setting, select a volume and click Modify. Specify the
following options for configuration.
2-32
Name
Type a name for the volume ID.
Preferred
Controller
This option is only available when the redundantcontroller system is in use. Select the preferred
controller to be in charge of managing and
accessing the volume. However, the controller
ownership will not change unless you check the
‘Change owner controller immediately’ box.
Write Cache
This option enables or disables the write cache of
a volume.
Write Sorting
This option enables or disables the sorting in the
write cache. To improve writing performance, it is
recommended to turn this option on for random
access. This option is available only if the write
cache is on.