Download 1 Video Eyetracker Toolbox

Transcript
Video Eyetracker Toolbox
Hardware states after Subject Calibration
CRS Visual Stimulus Generator
In order for the VSG to perform a subject calibration it is
necessary for the Video Eyetracker Toolbox to draw targets onto
some of the VSG’s video pages. The Toolbox also needs to
modify the VSG’s palette and may change global settings such as
the spatial units and colour space that are being used.
The following section describes the state of a VSG after a subject
calibration has been performed using the Video Eyetracker
Toolbox with the CRS Toolbox for MATLAB. For ease of use we
recommend that you try to draw and define your presentation
stimuli after you have run a subject calibration, or if this is not
possible then you should be aware that some of the video pages
that your presentation stimulus appears on may be corrupted or
cleared and that the spatial units, colour spaces and Object
Animation System objects you have previously defined may also
need to be reset.
•
The first and second video pages will be cleared using pixel
level 254 (CRS.BACKGROUND)
•
The Object Animation System (OAS) will be turned off
•
All (OAS) objects created prior to running a subject calibration
will be destroyed
•
Overlay pages will not be visible
•
Spatial units will be set to CRS.PIXELUNIT
•
The top left corner of video memory space will be set to (0, 0)
•
The drawing origin will be set to the centre of the screen.
•
The active colour space will be set to CRS.CS_RGB
•
The draw mode will be set to CRS.CENTREXY
33