Download MC81F8816/8616
Transcript
MC81F8816/8616 8.4 Addressing Mode The MC81F8816/8616 use six addressing modes; (3) Direct Page Addressing → dp • Register addressing In this mode, a address is specified within direct page. • Immediate addressing Example; G=0 • Direct page addressing C535 LDA ;A ←RAM[35H] 35H • Absolute addressing • Indexed addressing 35H • Register-indirect addressing data 2 ~ ~ (1) Register Addressing Register addressing accesses the A, X, Y, C and PSW. ~ ~ 0E550H C5 0E551H 35 1 data → A (2) Immediate Addressing → #imm In this mode, second byte (operand) is accessed as a data immediately. (4) Absolute Addressing → !abs Example: 0435 ADC #35H MEMORY 04 A+35H+C → A 35 Absolute addressing sets corresponding memory data to Data, i.e. second byte (Operand I) of command becomes lower level address and third byte (Operand II) becomes upper level address. With 3 bytes command, it is possible to access to whole memory area. ADC, AND, CMP, CMPX, CMPY, EOR, LDA, LDX, LDY, OR, SBC, STA, STX, STY Example; 0735F0 ADC When G-flag is 1, then RAM address is defined by 16-bit address which is composed of 8-bit RAM paging register (RPR) and 8-bit immediate data. Example: G=1, RPR=01H E45535 LDM ~ ~ 0F100H data 0135H 1 0F100H 42 ~ ~ data 0F035H 35H,#55H data ← 55H ;A ←ROM[0F035H] !0F035H 2 ~ ~ 1 A+data+C → A 07 0F101H 35 0F102H F0 address: 0F035 ~ ~ E4 0F101H 55 0F102H 35 December 3, 2012 Ver 1.03