Download 2012 - Honda Motorcycles

Transcript
12 NC700S (NM-1)-32MGS600.book 73 ページ
2012年4月18日 水曜日 午後6時17分
Engine Oil u Changing Engine Oil & Filter
Rubber seal
8. Apply a thin coat of engine oil to the
rubber seal of a new oil filter.
9. Install a new oil filter and tighten.
Torque: 26 N·m (2.7 kgf·m, 19 lbf·ft).
10. Install a new sealing washer onto the
drain bolt. Tighten the drain bolt.
Torque: 30 N·m (3.1 kgf·m, 22 lbf·ft).
Required oil
NC700S/SA
When changing oil &
engine oil filter:
3.4 litres (3.6 US qt, 3.0 Imp qt)
When changing oil only:
3.1 litres (3.3 US qt, 2.7 Imp qt)
NC700SD
When changing oil &
engine oil filter:
3.4 litres (3.6 US qt, 3.0 Imp qt)
When changing oil only:
3.2 litres (3.4 US qt, 2.8 Imp qt)
Maintenance
Oil filter
11. Fill the crankcase with the recommended
oil (2 P. 57) and install the oil fill cap/
dipstick.
12. Check the oil level. 2 P. 70
13. Check that there are no oil leaks.
14. Install the lower cowl.
73