Download Capstone Products

Transcript
Capstone Turbine Corporation • 21211 Nordhoff Street • Chatsworth • CA 91311 • USA
Advanced Power Server (APS): User’s Manual
Each of the group’s turbine setting categories will be described in detail in their own section
below. Once you have opened up the configuration window for the settings you want to edit and
make your changes, you will need to save them by clicking the UPDATE button on the
APS Configure window (shown in Figure 14) before you leave the Configuration mode or your
changes will not be saved. You will still need to upload the changed configuration to the APS
controller once all configuration changes are complete.
Battery Management Group Turbine Settings
Battery Management group settings are set through the Group“X”: Battery Management window
as shown in Figure 28.
Figure 28. Group“X”: Battery Management Configuration Window
This window allows you to configure the battery management settings for the MicroTurbines in
the selected group. There are four settings you can adjust, as described below.
•
Auto Sleep Time (hours):
Sets the time that an idle Stand Alone MicroTurbine group will operate before turning off
its power and shutting down to conserve its battery charge.
•
Equalization Charge Intervals (days):
Determines the number of days that the MicroTurbine will operate before initiating
equalization charge sequence.
•
Automatic Idle Recharge Enable:
This option is an enable/disable input that allows Grid Connect units to perform an
equalization charge even if the units are not running (requires unit to turn on the inverter
to draw charging power from the utility).
•
Input Table for Allowable Equalization Charge Day and Time:
Sets the time and day that a unit is allowed to do an equalization charge (units step load
capability is reduced during the charge process).
400011 Rev A (June 2007)
Page 35 of 67
Capstone reserves the right to change or modify, without notice, the design, specifications, and/or contents of this document
without incurring any obligation either with respect to equipment previously sold or in the process of construction.