Download Technical Reference Manual LSGH

Transcript
Introduction
Table 1.1
LSGH specifications (continued)
Weight
Current Loop Output
Housing detector
Rating
Power
Relay Output
Software usersettable
Rating
HART®
Communication
HART Protocol
PC interface
Auxiliary Input
Capability
Optional hand-held
interface
Type
Possible function
Electronics
On-board memory
Real-time clock
Diagnostics
LED indication
5.44kg (12lb)
4 ... 20 mA, isolated, into 250-800
Jumper selectable: source (active) or sink
(passive) mode.
Diagnostic alarm or process high/low alarm
function
6A at 240VAC, or 6A 24VDC (SPDTForm C), or
1/4HP at 120VAC
BEL202 FSK standard current loop output
HART modem and VEGA communications
software package
HART Communicator model 275 hand-held
terminal with VEGA device descriptions loaded
Frequency input (0/100 kHz)
Optional NORM or vapor phase compensation,
multiple gauge linking, & others
FLASH and two EEPROMs
Maintains time, date, source decay
compensation, and is Y2K compatible
+6V, Memory Corruption, HART, CPU Active,
Auxiliary, High Voltage, Relay & Field Strength
* Power specifications change to 115VAC or 230VAC if an internal heater kit is used. For
more information, see page C-1.
1-6
LSGH User Manual