Download CNC Instructions 4f
Transcript
connection is external and we connect the driver box to the computer through this connector whether the box is mounted externally or built into the computer. EMC or EMC2 will not run with a USB connection. You can also plug in a printer if need be. Now that most printers use a USB connection, this will probably not be something you need to do unless you want to use an older printer. Opening the instructions file on the computer Even if you are not familiar with Linux, you will find the Ubuntu desktop that opens when your computer starts up to be similar to the Windows® or Mac® desktop. These instructions for using CNC are duplicated on the “Utilities and Instructions” CD that came with your machine. There is also a shorter version that is just the workbook portion that includes the examples to learn to use g-code. Insert the CD in the CD/DVD drive and click on the icon that appears on the desktop to show the files and folders on the disk. Double click on a PDF file to open it. To open the HTML version, double click the file icon and then click “Display” in the window that opens. When done, close the instructions and right click on the DVD desktop icon and select “Eject.” We suggest you print out the shorter “Print” version of the instructions to use when you are working with the examples. Included along with the PDF and HTML versions are two MS Word (.doc) files (CNCInst5.doc and CNCprint5.doc). Double clicking on a .DOC file will open it in OpenOffice on your Linux computer or in Microsoft Word if opening it on a Windows computer. The most current version of the instructions can always be found on the Internet at http://www.sherline.com/CNCinstructions.htm. PDF and HTML files can be opened in both Linux and Windows. Please read all the instructions before attempting to use the EMC2 program to run your mill or lathe. CNC machining is a complicated process, and you will be directed at the proper time to run a program on the machine once you have gained the knowledge you need to do so. EMC2—Still the latest and greatest I chose the EMC2 program to work with because: 1) The EMC uses coding standards that are used in the modern machine tool world, 2) You will not be dealing with an outdated programming system, 3) The EMC can deal with the cutter compensation (cutter comp) that is needed to make complex parts in an efficient manner, 4) The cost saved by not having to pay for this marvelous programming system will allow you to purchase a separate dedicated computer to drive your mill, and 5) There’s great bunch of smart people working on the EMC to constantly improve the system and make it easier to use in the future and remain current. Basic operation of the computer and file navigation Booting up Before turning on the computer, make sure the 115V/230V switches on the back of the computer and on the side of the stepper motor power supply inside the computer are set to the proper voltage for your local electrical current. The default setting is 115 VAC. Also, make sure the ON/OFF switch for the stepper motor power supply on the side of the computer is in the “OFF” (down) position. Once the EMC program is fully 17