Download Glaciator X-Stream
Transcript
GENERAL OPERATION This chapter contains the following sections: • “Fluid”, below • “The refrigeration system” on page 28 • “Starting the Glaciator X-Stream” on page 29 • “Producing timed output” on page 30 FLUID Important! The warranty on this machine is conditional on the use of genuine JEM / Martin fluid only. Other fluids may represent a health hazard when used in this machine, and may damage the internal components by clogging the heating element or spitting from the nozzle. Warning! Do not bypass the fluid sensor, this could cause damage to the machine. The Glaciator X-stream has an on-board 5L (1.3 US Gal.) container that provides approximately 1.5 hours of continuous operation at full output. This will vary with the power supply voltage, which will determine the maximum continuous output level. A remote fluid system can also be installed (see “Installing a remote fluid system” on page 9). 26 Glaciator X-Stream user manual