Download RF & Communication Trainer

Transcript
RF COMMUNICATION and SIGNALS EXPERIMENTS
4. Set up the GSP-730 as follows:
 Center frequency: 880MHz
 Span: 50MHz
 Reference level: 0dBm
 RBW: Auto
Step1
F1
8
Step2
F1
0
Step3
Amplitude F1
Step4
F1
0
5. Limit line Pass/Fail test.
Step5
Step6
F1
F2
Below the display, you can set the magnitude and frequency of each point.
Move the cursor to select a point and edit it with the number pad and unit
keys. Press F6 to return to the previous menu.
Step7
F1
6. According to the procedures above, students can set the limit lines.
7. Adjust the amplitude knob on the GRF-1300. Observe the Pass/Fail test
results and record the results to table 9-1.
8. The same functionality can be achieved by sending remote commands from
a PC using HyperTerminal.
77